Neutras-2 low thermal conductivity wall ties

NEUTRAS-2 general purpose wall ties have both low thermal conductivity and high structural performance levels. This means they can be excluded from the current U value calculations in EN ISO 6946 and provide a credible solution to new legislation requirements. Suitable for small commercial buildings and domestic dwellings with a maximum height of 15m and cavity widths up to 300mm. (Type 2 Wall Tie)

Downloads

Datasheet
Technical Drawning
DOP

Code	Size	Cavity	Units
Neutras-2-200	200mm	75mm	250 Pack
Neutras-2-225	225mm	100mm	250 Pack
Neutras-2-250	250mm	125mm	250 Pack
Neutras-2-275	275mm	150mm	250 Pack
Neutras-2-300	300mm	175mm	250 Pack
Neutras-2-325	325mm	200mm	100 Pack
Neutras-2-350	350mm	225mm	100 Pack
Neutras-2-375	375mm	250mm	100 Pack
Neutras-2-400	400mm	275mm	100 Pack
Neutras-2-425	425mm	300mm	100 Pack

BBA Approved cavity wall ties (Agrément Certificate: 17/5462).
Application – A low thermal conductivity, general-purpose wall tie for applications such as small commercial buildings and domestic dwellings. They are suitable for buildings with a maximum height if 15m and for flat sites where the basic wind speed is up to 31m/s and altitude is not greater than 150m above sea level.
Design - Constant drip spiral feature to prevent moisture travelling across the cavity, it can be installed either way up.
Material - Manufactured from continuous basalt fibre and vinyl ester resin composite.
Behaviour in relation to fire - Suitable for buildings requiring 60 minute fire resistance.
Durability - Service life of not less than 60 years.
Thermal performance - In situations where thermal losses through ties need to be taken into account, the products will adequately resist thermal transmittance through a wall cavity.
Compliance - Tested as Type B (sound) and as Type 2 (strength) to BS EN 845-1.
Specification – Available for specification on the NBS Source platform.

Neutras-2 low thermal conductivity wall ties

Downloads

Request Quote